Glass pipe manufacturers, Xiong Wang Thai (certified), glass pipe provided by Xiong Wang Thai Plastic Products Factory. Xiong Wang Thai Plastic Products Factory (www.wangtai668.com) is specialized in the "plastic pipe, MPP power pipe, CPVC pipe electricity, irrigation pipe, HDPE pipe, p" of the enterprise, the company adhering to the "honesty, hard service" philosophy, to provide you with the highest quality products and services. Welcome to inquire! Contact: Fengjing Li. The main molding GRP pipes controlled by the computer, in accordance with the provisions of the mandrel with the same filament wound glass-lined steel pipe manufacturing process characteristics of the glass pipe, after the gel according to design good linear structural layer and the thickness of the wound, and quartz sand mortar mixed with the resin layer wrapped around the structure, the final outer protective layer of the winding. Of raw material: resin, chopped fibers, continuous glass fiber and quartz sand. Product specifications Diameter: DN100-4000 pressure rating: 0.1MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.0MPa, 2.5MPa stiffness rating: SN1250, SN2500, SN5000, SN10000. Length: 6m, 12m ⑩ when the flange and pipe connections glass steel companies, both from the inside and the pipe must be welded low-pressure pipe, flange and pipe axis tilt glass pipe diameter should be less than or equal to 1/100. Flange connection should be strictly on the glass pipe, the maximum allowable deviation is less than the axial 2mm, the method may not be used to eliminate skew strong bolts. Tighten the bolts out twice, the first time evenly crosswise again, and then tighten the bolts.